Home
Flooring and tile calculator
Covers a rectangular floor. Use the coverage on the box you will buy. Tile size is optional and is only for a count of pieces.
These fields start with a sample so you can check the arithmetic. Replace them with your own figures.
How to use it
Enter the room in feet or meters. Waste is higher for a diagonal layout than for a straight lay. Ten percent is a straight-lay starting point, not a rule for every pattern.
If you set either tile side to zero, the tile count is left off. Tile size is inches in feet mode and centimeters in meter mode. Closets and hearths are extra area. The wall paint for the same room is Paint coverage calculator.
Formula
Area = length × width. Area with waste = area × (1 + waste ÷ 100). Boxes = that area ÷ box coverage, rounded up. If both tile sides are filled in, one tile’s area is the two sides converted to feet or meters, and the tile count is the waste-adjusted area divided by that, rounded up.
Worked example
Questions
Should stairs use this number?
No. A stair tread is its own rectangle, and the riser is another. Add them, or keep them off this floor.
Why do boxes and tiles disagree?
A box holds whatever the maker printed, including extra for the pattern or a short piece. The tile count is only the pieces in the area. Buy boxes, not loose tiles, unless you are sold individual tiles.
What waste percent for a diagonal lay?
People often plan 12% to 15% instead of 10%, because the cuts along the walls get larger. Measure one room before you buy the whole house.
Does this include underlayment or thinset?
No. Those follow their own coverage numbers. This page stops at the finish floor.