Home

Paint coverage calculator

Find the paintable area of a rectangular room and the amount to buy. Use the coverage printed on the can when you have it. The defaults are only a starting point.

How to use it

Measure the floor length and width and the wall height in one unit system. Switch the unit control if you measured in the other. Door and window areas start at common sizes; change them if your openings are larger.

Coats and waste multiply the net area. A textured wall or a color change often needs more paint than the smooth-wall number on the can, so raise the coverage field or the waste percent to match the can and the surface. The labor price for the job belongs on Handyman job estimate.

Formula

Wall area = 2 × (length + width) × height. Net area = wall area − door area − window area + ceiling, and it cannot go below zero. Amount = net area × coats × (1 + waste ÷ 100) ÷ coverage. Buy the next whole can when the amount is not already a whole number.

Worked example

The sample room is 12 by 10, with walls 8 high, one door, one window, 2 coats, and 10% waste. Net area is 439. You need about 2.76 containers at a coverage of 350, so the buy line is 3.

Questions

Why might the can cover less than the default?

The default is a smooth, sealed wall in a typical range: about 350 square feet per gallon, or 10 square meters per liter. Porous drywall, texture, and dark colors soak up more. Type the number from the can you will actually open.

Does this include primer?

Only if you count primer as a coat or add its area yourself. A full primer coat is another coat. A spot prime is less. The form cannot see the wall.

What about closets and gables?

The room is a box. Add another run of length and width for a closet, or put extra area into the waste percent if it is small. A sloped ceiling is not the flat ceiling box.

Should I buy the rounded-up number?

The last line rounds up to a whole container so you are not short by a cup. If you already have an opened can, subtract what is left before you buy.